Height Safety Engineers              We make working at heights safe

5 Frequently Asked Fall Protection Questions Answered

Fall protection

Working in construction can be risky business; often having to work at considerable heights in order to get the job done. Thus, keeping yourself and employees safe in order to prevent costly lawsuits and provide peace of mind requires having to invest in reliable fall protection equipment for all involved.

However, there may be certain fall protection questions that need answers in order to be sure of your purchase – allowing you to be well-informed before making any purchases. Besides, what better way to put your mind at ease than finding valuable information straight from the experts.

Q: “What does the statement “100 percent tie-off fall protection” refer to?”

A: As a simple term used in construction lingo, it basically means that a construction worker has to be protected by an active or passive fall protection system at or above a certain height. Whether a safety harness or guardrail needs to be used, the worker has to be protected in order to be able to pass a certain height level.

Q: “Is it acceptable to attach your fall protection system to scaffolding?”

A: If the scaffolding manufacturer approves such use and the scaffolding is able to support heavy loads, then a construction worker is allowed to attach fall protection to the scaffolding structure. However, always ensure that your connecting hardware incorporates large hooks in order to comfortably attach and close properly around the scaffolding.

Q: “Should you wear a Full Body Harnesses over or under winter clothing?”

A: Safety harnesses should always be worn over clothing in order to visibly show that you’re wearing fall protection equipment. This will also prevent any injuries if the safety harness is pulled upward due to a fall – preventing any injuries which may occur from wearing fall protection incorrectly.

Q: “What is the life expectancy of fall-protection equipment?”

A: Since most manufacturers no longer add an ‘expiration date’ to fall protection equipment, this depends entirely on the work environment and circumstances in which the equipment was exposed to. It’s up to the manufacturer to determine a reasonable expiration date, but it should also be noted that safety equipment that has experienced a fall should be replaced or repaired immediately. According to EHS Today, “Full-body harnesses and energy-absorbing lanyards exposed to a fall arrest immediately should be removed from service and replaced.”

Q: “Should I Use an Energy-Absorbing Lanyard or a Self-Retracting Lanyard?”

A: As a general rule, it’s important to remember that construction workers working below 17.5 feet should use a retracting lanyard (SRL), whilst workers working above 17.5 feet should incorporate an energy-absorbing lanyard or SRL. When it comes to choosing a connector, following the correct requirement as you would with a safety harness is crucial in order to ensure safety when working at considerable heights.

Bonus Q: “What harness and lanyard fall protection products are recommended for easy clean up”

A: It’s always a good idea to purchase resist-coated web products which clean easier in order to avoid any asbestos or paint residue left behind.

When searching for different types of fall protection equipment, it’s important to ensure that you choose products based on quality instead of budget. Reliable safety harness manufacturers will be able to point you in the right direction in regards to finding the exact fall protection equipment to suit your needs – ensuring that your employees are well taken care off when extended high above the ground.







Request a Quick Quote